5.5mm Spinal Pedical Screw System Instrument Set
The 5.5mm Spinal Pedicle Screw System Instrument Set is a collection of surgical instruments used to perform spinal fusion surgery. The set typically includes various instruments needed for the placement of 5.5mm diameter pedicle screws, including screwdrivers, awls, taps, depth gauges, and rods.
Here are some instruments that may be included in a 5.5mm Spinal Pedicle Screw System Instrument Set:
Pedicle screwdriver: Used to screw the pedicle screws into the vertebral body.
Awl: Used to create a pilot hole for the pedicle screw.
Tap: Used to create threads in the pilot hole to allow for the screw to be securely fastened.
Depth gauge: Used to measure the depth of the pilot hole to ensure the screw is placed at the appropriate depth.
Rod bender: Used to bend the rods that connect the pedicle screws and secure the spinal fusion.
Rod cutter: Used to cut the rods to the appropriate length.
Plate holder: Used to hold the plate in place while the screws are secured.
Plate bender: Used to bend the plate to fit the contour of the vertebral body.
Drill bits: Used to drill holes in the vertebral body for the screws.
It's important to note that the specific instruments included in a 5.5mm Spinal Pedicle Screw System Instrument Set may vary depending on the manufacturer and the intended use of the set.
5.5mm Spinal Pedical Screw Instrument Set-Ⅰ
5.5mm Spinal Pedical Screw Instrument Set-Ⅱ
5.5mm Spinal Pedical Screw
Specification
| No. | REF | Specification | Qty. |
| 1 | 2200-1301 | Double-Head Probe (Straight & Bent) | 1 |
| 2 | 2200-1302 | Single-head Probe(Straight) | 1 |
| 3 | 2200-1303 | Tap φ4.5 | 1 |
| 2200-1304 | Tap φ5.5 | 1 | |
| 4 | 2200-1305 | Tap φ6.5 | 1 |
| 2200-1306 | Tap φ7.5 | 1 | |
| 5 | 2200-1307 | Mould Rod 200mm | 1 |
| 6 | 2200-1308 | Crosslink Screwdriver SW3.5 | 1 |
| 7 | 2200-1309 | Screw Cutter for Long Arm Screw | 1 |
| 8 | 2200-1310 | Crosslink Nut Holder SW3.5 | 1 |
| 9 | 2200-1311 | Screw Nut Holder T27 | 1 |
| 10 | 2200-1312 | In-situ Bending Iron L | 1 |
| 11 | 2200-1313 | In-situ Bending Iron L | 1 |
| 12 | 2200-1314 | Pedicle Probe Straight | 1 |
| 13 | 2200-1315 | Pedicle Probe Bent | 1 |
| 14 | 2200-1316 | Screwdriver T27 | 1 |
| 15 | 2200-1317 | Fixation Pin Ball-type | 1 |
| 16 | 2200-1318 | Fixation Pin Ball-type | 1 |
| 17 | 2200-1319 | Fixation Pin Pillar-type | 1 |
| 18 | 2200-1320 | Fixation Pin Pillar-type | 1 |
| 19 | 2200-1321 | Crosslink Measurement | 1 |
| 20 | 2200-1322 | Screw Measurement | 1 |
| 21 | 2200-1323 | Rod Holding Forcep | 1 |
| 22 | 2200-1324 | Rod Pushing Forcep | 1 |
| 23 | 2200-1325 | 5.5mm System Spinal Persuader Sleeve | 1 |
| 24 | 2200-1326 | 5.5mm System Spinal Persuader | 1 |
| 25 | 2200-1327 | Compressor | 1 |
| 26 | 2200-1328 | Spreader | 1 |
| 27 | 2200-1329 | Rod Twist | 1 |
| 28 | 2200-1330 | Counter Torque for Screw Cutter | 1 |
| 29 | 2200-1331 | 12 N.m Torque Wrench | 1 |
| 30 | 2200-1332 | T-handle Quick Coupling | 1 |
| 31 | 2200-1333 | Straight Rechat Screwdriver | 1 |
| 32 | 2200-1334 | AWL | 1 |
| 33 | 2200-1335 | Rod Bender | 1 |
| 34 | 2200-1336 | Rod Pusherial | 1 |
| 35 | 2200-1337 | Insert Device for Fixation Pin | 1 |
| 36 | 2200-1338 | Rod Holder | 1 |
| 37 | 2200-1339 | Screwdriver for Polyaxial Screw | 1 |
| 38 | 2200-1340 | Screwdriver for Monoaxial Screw | 1 |
| 39 | 2200-1341 | Aluminium Box | 1 |
Author：MakeUp，Reprinted with attribution：https://www.linking-china.com/4393.html